earl the perl has them, some new some need recroming thats where i got mine

Here is Earls site. http://www.marine-sales.com/
Jeff found a new deck vent bubble there. Earl dose have a lot of stuff..

You rubbin' it in Mark?..............

The vents pictured on the Magnum site were for a Starfire....

Aaron, there still maybe one over there.

------To add just a bit to what Mark has told you, A.C.P. has been casting bronze stuff since the bronze age, just about! They did a bunch of stuff for C.C. back in the day and were a major supplier to at least DONZI, if not all the rest of the Aronow boat companies. They have a large amount of finished pieces in hundreds of bins, but they dont have extras of everything they ever built. Osha caused them to leave the chrome plating behind, so pieces that need chroming need finishing as well. That becomes time consuming which translates into expensive. They actually made the DONZI air-scoops but havent done a run of them for years and have none now to my knowledge. If they have finished pieces you will probably be able to buy them but if they dont, doing one for you probably wont get done. Like any other business they need volume orders (at least some volume)..........Bill S

It may be easier to just have someone copy it with a CNC machine?....

That is what I suggested.however I thought there would be some around seeing there we 400 + Sports made.I think I have 4-6 scoops but they may have come off of a Donzi also the bow eye hook from Atwood is 7 inches long.Bud

The cnc or sand cast is a great idea, if your trying to keep it original. As for magnum having parts for old boats, I purchased a new anchor and anchor box, new hardware for my front hatch on my sedan, and rear seat mounts. And they do have most of the stickers. And when i was looking for a windshield, they hooked me up with the original company and they fabricated it old school. So you never know what they have if we dont ask, i have been there on many occassions and they have a lot of mixed parts and pieces in the stock room.

Hey Mark, Would you know who or where makes the sport engine hatches?..............I think Bud told me you might know.
Thanks for the help so far.........................................Scippy