Pictures from LOTO today
#21
Just spent over two hours today breaking up the ice around my dock, that sucked.
They are letting the water out and the ice is moving with it.
Two weeks ago no ice, today almost 2 inches in some spots.
A deicer is on my list for next year.
They are letting the water out and the ice is moving with it.
Two weeks ago no ice, today almost 2 inches in some spots.
A deicer is on my list for next year.
#26
Registered
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Location: Lake of the ozarks
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
Hi Wild,
What ? You just need to talk to the right people !!!
Phil at boat Lift Marine Center in Osage Beach. 573 348 4999
Phil sells Titan Lifts and will custom build as you can see with ours. Pm me and or call Phil direct tell him I sent you he has one out back for a 31 cat back in style new in stock.
They are great to work with.
Thumper038 / Jim
What ? You just need to talk to the right people !!!
Phil at boat Lift Marine Center in Osage Beach. 573 348 4999
Phil sells Titan Lifts and will custom build as you can see with ours. Pm me and or call Phil direct tell him I sent you he has one out back for a 31 cat back in style new in stock.
They are great to work with.
Thumper038 / Jim
Last edited by thumper038; 02-16-2009 at 03:10 PM.
#28
Guest
Posts: n/a
http://www.polylift.com/site/
#29
Had a 30 Spectre w/egg beaters on my back-in lift for awhile. All they had to do was move the bunks.
http://www.polylift.com/site/
http://www.polylift.com/site/
#30
Guest
Posts: n/a
No doubt it's a tight fit. I have always shut the boat off as soon as the rear is started into the slip and walk the boat in the rest of the way. My slip is only 12' wide so keeping the Spectre centered while backing it in was easy. Doing it with a 16' wide slip may be a little tricky depending on the width of the cat.