New Wrap on a 30ft Motion
#1
Registered User
Platinum Member
Thread Starter
Join Date: Feb 2007
Location: Minneapolis, MN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
New Wrap on a 30ft Motion
I put a new wrap on my 30ft Motion at the begining of the season last year. Not only did it greatly improve the look of the boat, but held up pretty well through the first year. The guys at Ultimate Boat Wraps did an awesome job helping me design a new look for the boat that matched the interior.
They are at the Minneapolis Boat Show again this year.
They are at the Minneapolis Boat Show again this year.
#3
Registered User
Platinum Member
Thread Starter
Join Date: Feb 2007
Location: Minneapolis, MN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
The boat is running 2008 300XS's, it has a set of 14.5 X 32 4 blade labbed Cleavers on it now and is running about 96mph in fresh water. I have one engine that is set a little high and I am going to be adjusting the settings in the Spring. I am also going to be looking at 3 blade cleavers for the boat. I am hoping to get a tripple digit number which I am hearing is possible.
#7
Registered User
Platinum Member
Thread Starter
Join Date: Feb 2007
Location: Minneapolis, MN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
There are a couple pictures on the Ultimate Boat Wraps website, I don't think I have anymore pics. I can get some in the Spring. I run the boat on the Whitefish Chain, so you probably won't see it on the river. I did run a 26ft American Offshore on the river a few times.