3600 w/ Ilmors
 

I saw somewhere that Nortech had built a 3600 with ilmors and was curious how it performed. Does anyone have any info on this boat?

Re: 3600 w/ Ilmors
 

You must have seen it in a crystal ball. Nothing built yet but a 43 V w/ trips is in the rig shop now. A 36 should be coming down the line in a few months.
TS

Re: 3600 w/ Ilmors
 

It was in one of Florida powerboats ads but it was just a drawing. I have someone looking now waiting to see perf. numbers on this set up. He is not sure what he wants. He has had me checking on a couple boats over the last few months. Reliability is a major concern he has and 525's seem to be a good set up. Ilmor/Arneson package would be ideal.

How many 36's have been built with Arnesons and how did they perform?

Re: 3600 w/ Ilmors
 

There's one ASD 6 -36 w/ gas motors in MI. Seems to be doing fine. There's another w/ ASD 8's with Yanmar Diesels in Norway and no problem there either.

Re: 3600 w/ Ilmors
 

The Ilmor will be a great package with the imco extreme drive, We have a 39v coming with this setup looking for 100+ and in the 36 cat, I believe 120+ is attainable, the imco drive is a very fast drive, will have to wait and see

Re: 3600 w/ Ilmors
 

Wouldn't have the imco's. Not consistent on their quality and poor customer service. Would take a Teague platinum over the Imco.

you looking at a nortech now , ha ha ha, right

Do your homework my step dad picked up a 4300 this summer.

I heard from Nortech that they weren't making anymore ASD-6 rigged 3600's.

I bet they would if someone payed them to do it though.

Ther ASD-6 was never a great Cat drive, Arneson designed the ASD 7 for cats. The steering geometry is more suitable for a longer tie bar needed for cats. The ASD-6 boat has been rerigged with asd-7's.