![]() |
Originally Posted by salesmanship
(Post 2895315)
Hull # 1 has rolled into rigging.
We're going to rig it with a temporary console and seating so we can start testing in two weeks. |
As a part of the Big Three bailout. Obama sent us a shipment of some leftover Chrysler 125 HP outboards. I'm going to use 6 of them.
If those don't show up I've got 3 300 Verdados on the floor just in case. |
Originally Posted by salesmanship
(Post 2896543)
As a part of the Big Three bailout. Obama sent us a shipment of some leftover Chrysler 125 HP outboards. I'm going to use 6 of them.
If those don't show up I've got 3 300 Verdados on the floor just in case. |
1 Attachment(s)
If not used for fishing the seating in a cc is important. It seems you never have enough. This is the best set up I have seen. Do you have any ideas on how this one will be set up?
|
It's a Nortech they will build it the way you want, for the most part.
|
3 Attachment(s)
How about seats like this? Huury up Terry, summer is here!
|
You forgot to tell them about the new Armstrong tiller arm steering that comes free with the bailout motors, no need for additional batteries with the new just "pull n go" start too.
You guys are so far ahead it is amazing! |
4 Attachment(s)
Time for some photos.
We have the boat rigged with a temporary console and bench seat so we can get our sea trials going. Nothing in the boat yet but we loaded 500lbs of sand bags to simulate the running weight. Tooling is underway on the console, helm seat and hard top. |
Terry, the boat looks real nice! and Big! Does the boat have a self-draining cockpit?
|
Of course
|
| All times are GMT -5. The time now is 06:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.