Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Nor-Tech (https://www.offshoreonly.com/forums/nor-tech-143/)
-   -   Terry any real pictures of the new 39cc ? (https://www.offshoreonly.com/forums/nor-tech/203619-terry-any-real-pictures-new-39cc.html)

delleto 07-08-2009 08:52 AM

Boat looks great, guys! Nice to see it on the water after all the hard work & effort put into it.

underpressure 07-10-2009 12:10 PM

C'mon Terry give them some more.

The boat is HUGE, and very impressive on the water, the bow is killer.

We ran the boat on Tuesday in the river and it was amazing, 3 seconds to plane (but with almost no bowrise it is hard to really tell) Actually I planed it at about 2100, about 15 seconds 0-60 and it topped out north of 73 mph but that is classified :) on stock props and a realistic motor height.

It handles like a sports car as far as reaction when you move the wheel and backed up beautiful. We did some pretty hard turns and the boat carved hard and the motors stayed hooked up with good pressure. I have not run it in the rough yet but I was able to bury the bow into a decent size cruiser wake and the water stayed out.

Fit and finish is nuts for a prototype, but I guess it just talks about workmanship. We ran about 1.3 to 1.4 MPG at cruise but we really didn't spend a lot of time finessing it for maximum MPG.

Carl

budd 07-16-2009 09:10 AM

I see it running around Nassua today, any way of getting a peak of it at atlantis marina? Its a great looking boat!

salesmanship 07-20-2009 08:35 AM

Sorry I was in the Bahamas too. Otherwise I would have arranged something.
The DEA and Bahamas guys were doing some sea trials.
And BTW they really liked it!

mcraymond3 08-17-2009 08:13 PM

Looks great Terry!

salesmanship 08-18-2009 01:04 PM


Originally Posted by mcraymond3 (Post 2933691)
Looks great Terry!

Time to trade???

ktron 08-24-2009 11:08 AM

Any new pics?

salesmanship 08-26-2009 08:18 AM

1 Attachment(s)
We went ahead and painted #1 while we are finishing up on the console and seat tooling.

Jassman 08-26-2009 09:21 AM


Originally Posted by salesmanship (Post 2939975)
We went ahead and painted #1 while we are finishing up on the console and seat tooling.


very nice.. simple,, looking forward to the new bracket and T-Top. When will the 88mph quad boat be finished.:grinser010:

DoTheMath 09-08-2009 03:58 PM

Terry -

What are the specs - known and expected... once complete? Beam, displacement, draft, etc... How far from done is the first one?

Looks killer so far! :cool:


All times are GMT -5. The time now is 07:09 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.