|
Originally Posted by ICDEDPPL
(Post 4919189)
More like Snowstorm! :D
Seats coming along too . https://cimg0.ibsrv.net/gimg/www.off...ebcfce233f.jpg |
Local lady that has done stuff for me before, I don`t think she figured out that when you say "it`s for a boat" the price triples, She`s very very reasonable.
I bought all my own fabric and thread. We were trying to figure out what to do with the headrest .. Used some paint, markers and electrical tape to see how my design would look, Came out better than expected. https://cimg9.ibsrv.net/gimg/www.off...68d3a58776.jpg |
They changed the lines on the port side by 3600 supercat from what the renderings have.
|
Well she does a very nice job. When I had mine redone back in 2009 I used a small shop down at the lake but he's no longer around. Mine are getting a worn and would probably be something I have redone in the future. There's way more pieces of upholstery than you'd think with the side panels and such.
|
Originally Posted by fountain4play
(Post 4919332)
Well she does a very nice job. When I had mine redone back in 2009 I used a small shop down at the lake but he's no longer around. Mine are getting a worn and would probably be something I have redone in the future. There's way more pieces of upholstery than you'd think with the side panels and such.
K&S Uphostery $21,840 Go a bit outside of ROTO to Jefferson City and the price drops to $8770 B's Kustom Kreations 423 W Dunklin Jefferson City, MO 65101 573.635.8030 [email protected] www.BKKLLC.com www.facebook.com/BKKLLC Those folks were great but I still got a better deal locally, under $6k. |
Originally Posted by Wildman_grafix
(Post 4919329)
They changed the lines on the port side by 3600 supercat from what the renderings have.
It`s confusing right now . I also gave them artistic freedom , sometimes what looks good on paper doesnt work on the boat, if they want to move things around I`m fine with it . We removed some lines from the original rendering for example .. less line less busy https://cimg0.ibsrv.net/gimg/www.off...ddc2641064.jpg |
Oh believe me I get it. As I said before watching the steps helps me on my stuff when I do graphics, an airbrush is sooooo much nicer.
I hate masking! LOL. On the cost for your interior redo that is a great price, I paid 5K for my little fountain, till the wife said well what about the cabin, and the trim and and and.
Originally Posted by ICDEDPPL
(Post 4919343)
I would wait till all the tape is gone and the colors are on.
It`s confusing right now . I also gave them artistic freedom , sometimes what looks good on paper doesnt work on the boat, if they want to move things around I`m fine with it . We removed some lines from the original rendering for example .. less line less busy https://cimg0.ibsrv.net/gimg/www.off...ddc2641064.jpg |
Today it gets the white out treatment, then "ice", then the masking gets pulled and ice again, the white will have extra "ice" sparkle.
Then 6 coats of clear and then cutting buffing polishing .. They got my drive guardian all painted up too. Performance is killin it!:bananalove: https://cimg4.ibsrv.net/gimg/www.off...ba729849a7.jpg https://cimg0.ibsrv.net/gimg/www.off...b547b46a81.jpg https://cimg9.ibsrv.net/gimg/www.off...af13cb4557.jpg https://cimg6.ibsrv.net/gimg/www.off...edcbadcce7.jpg https://cimg3.ibsrv.net/gimg/www.off...19ac98683c.jpg https://cimg7.ibsrv.net/gimg/www.off...efed4e4a40.jpg |
|
looks killer Dan 37% increase in sales just in time.........:drink:........ see you in June
|
| All times are GMT -5. The time now is 07:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.