Renderings ...
#82
Thread Starter
Registered

Joined: Jun 2009
Posts: 9,946
Likes: 6,418
From: Chicago
Local lady that has done stuff for me before, I don`t think she figured out that when you say "it`s for a boat" the price triples, She`s very very reasonable.
I bought all my own fabric and thread.
We were trying to figure out what to do with the headrest ..
Used some paint, markers and electrical tape to see how my design would look, Came out better than expected.

I bought all my own fabric and thread.
We were trying to figure out what to do with the headrest ..
Used some paint, markers and electrical tape to see how my design would look, Came out better than expected.

#84
Well she does a very nice job. When I had mine redone back in 2009 I used a small shop down at the lake but he's no longer around. Mine are getting a worn and would probably be something I have redone in the future. There's way more pieces of upholstery than you'd think with the side panels and such.
#85
Thread Starter
Registered

Joined: Jun 2009
Posts: 9,946
Likes: 6,418
From: Chicago
Well she does a very nice job. When I had mine redone back in 2009 I used a small shop down at the lake but he's no longer around. Mine are getting a worn and would probably be something I have redone in the future. There's way more pieces of upholstery than you'd think with the side panels and such.
K&S Uphostery $21,840
Go a bit outside of ROTO to Jefferson City and the price drops to $8770
B's Kustom Kreations
423 W Dunklin
Jefferson City, MO 65101
573.635.8030
[email protected]
www.BKKLLC.com
www.facebook.com/BKKLLC
Those folks were great but I still got a better deal locally, under $6k.
#86
Thread Starter
Registered

Joined: Jun 2009
Posts: 9,946
Likes: 6,418
From: Chicago
It`s confusing right now .
I also gave them artistic freedom , sometimes what looks good on paper doesnt work on the boat, if they want to move things around I`m fine with it .
We removed some lines from the original rendering for example .. less line less busy

#87
Registered

Joined: Jun 2007
Posts: 7,297
Likes: 1,805
From: Merritt Island, FL
Oh believe me I get it. As I said before watching the steps helps me on my stuff when I do graphics, an airbrush is sooooo much nicer.
I hate masking! LOL.
On the cost for your interior redo that is a great price, I paid 5K for my little fountain, till the wife said well what about the cabin, and the trim and and and.
I hate masking! LOL.
On the cost for your interior redo that is a great price, I paid 5K for my little fountain, till the wife said well what about the cabin, and the trim and and and.
I would wait till all the tape is gone and the colors are on.
It`s confusing right now .
I also gave them artistic freedom , sometimes what looks good on paper doesnt work on the boat, if they want to move things around I`m fine with it .
We removed some lines from the original rendering for example .. less line less busy

It`s confusing right now .
I also gave them artistic freedom , sometimes what looks good on paper doesnt work on the boat, if they want to move things around I`m fine with it .
We removed some lines from the original rendering for example .. less line less busy

#88
Thread Starter
Registered

Joined: Jun 2009
Posts: 9,946
Likes: 6,418
From: Chicago
Today it gets the white out treatment, then "ice", then the masking gets pulled and ice again, the white will have extra "ice" sparkle.
Then 6 coats of clear and then cutting buffing polishing ..
They got my drive guardian all painted up too.
Performance is killin it!






Then 6 coats of clear and then cutting buffing polishing ..
They got my drive guardian all painted up too.
Performance is killin it!

















........ see you in June