Oil Cooler Installation Ideas

Reply Subscribe

Thread Tools

11-22-2008 | 10:32 AM

#31

Rage

Thread Starter

Gold Member

Joined: Sep 2005

Posts: 1,987

Likes: 0

From: Missouri

Quote:

Originally Posted by Plane Silly

Sorry I can't help much with the mount. The Tbolt clamps are made to the floor mounts. I'm sure CPperformance or Eddie Marine carry something like them.

Thanks Plane Silly. Yes they do but it is the high end/dollar billet aluminum stuff. I am looking an alternative. Do you happen to know who installed your heat exchanger? I sent your picture to Dustin Whipple who said those were not his brackets.

Bill

12-27-2008 | 08:48 PM

#32

27 MAGNUM

Registered

Joined: Sep 2005

Posts: 238

Likes: 0

From: Grand Island NY

Is the water supposed to go to the sea pump first then to the oil cooler or can I run the water through the oil cooler on the way to the sea pump?

12-27-2008 | 09:59 PM

#33

DareDevil

Banned

Joined: Oct 2006

Posts: 5,844

Likes: 0

From: Bradenton Florida

Quote:

Originally Posted by 27 MAGNUM

Is the water supposed to go to the sea pump first then to the oil cooler or can I run the water through the oil cooler on the way to the sea pump?

I would run it into the seastrainer ,then pump and then oilcooler .

12-28-2008 | 05:43 PM

#34

39 Unlimited

Registered

Joined: Sep 2001

Posts: 1,751

Likes: 11

From: Cincinnati Ohio

Quote:

Originally Posted by Linster

Rob
I was hoping to find some Merc 575SC tops complete with blowers & throttle bodies. None seem to be moving around. May look for some whplles or go bigger

Merry Christmas big boy, see ya in Louisville: 575 X 2 = 98 - 100 MPH. Rock on Linster!