heat engine hatch
#2
Hi Jimmy,
Unless something has changed from the '01 that I have, no. Make sure it's not just a dead battery, blown fuse or circuit breaker, or loose wire.
You may have to remove the rear bench to get to the ram.
Regards,
Steve
Unless something has changed from the '01 that I have, no. Make sure it's not just a dead battery, blown fuse or circuit breaker, or loose wire.
You may have to remove the rear bench to get to the ram.
Regards,
Steve
#4
Registered

Joined: Apr 2005
Posts: 762
Likes: 0
From: Long Island New York
I sometimes (almost always) have to play with the dash switch in order for mine to work. I have to keeps pressing it over and over and then it works. I never investigated the problem because it evenually works. Most likely its bad contact on the switch.
#5
Registered
Joined: Sep 2010
Posts: 787
Likes: 2
From: Killeen Texas/Fort Hood
The toggle switched leave a bit to be desired IMO, I am sure there is a bad ass replacement somewhere out there. Good luck with the hatch! You could test the switch on the back for output when depressed, glad there is a little panel there.




