How fast?? Nordic heat
#21
Registered
iTrader: (1)
don't know if the rage will benefit or not but after reading this i measured my x and came up with 17, its tough to get an accurate reading because of the trailer, i've never experienced blow out coming out of the hole and my boat likes alittle positive trim, just thinking out loud, btw i can't be beat by kevins brothers warlock either!!!
#22
Registered
Join Date: Apr 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
купить: препа&
аптека: сиалис купить аптека, левитра цена в аптеке, сиалис цена, левитра сколько стоит, сиалис в нижнем новгороде, левитра софт, сиалис аптека, виагра сиалис левитра форум, купить виагру с доставкой, левитра 20 мг, последствия сиалис.
#23
Registered
#27
Registered
iTrader: (1)
Join Date: Jun 2009
Location: Kirkland, WA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
I've been running a 30P 4 blade with a 1.5 spacer and -1 imco lower. Works good not great, torques the boat over pretty hard.
I've since removed the spacer, and just running the -1 lower with a 5 blade 29 hering. Works better, still chine walk but better numbers. Even though I raised it up, the 5 blade makes up for the extra slip.
My prop hub runs 'about' 3ish" below the hull of the boat via straight edge. Little bit of gorilla math involved since I run an extension box.
I'm going to try a -2 in the spring.
I've since removed the spacer, and just running the -1 lower with a 5 blade 29 hering. Works better, still chine walk but better numbers. Even though I raised it up, the 5 blade makes up for the extra slip.
My prop hub runs 'about' 3ish" below the hull of the boat via straight edge. Little bit of gorilla math involved since I run an extension box.
I'm going to try a -2 in the spring.
#28
Chris
Gold Member