Stern Light ??????
#1
Registered
Thread Starter
Join Date: Feb 2007
Location: Portland OR
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Stern Light ??????
Ok, the stripper pole stern light goes up and down but the light won't light up, it looks like a LED light, is there a way to test the light? also at what point does it light up, when the pole is all the way up or when it starts going up?
#2
Registered
iTrader: (3)
If its the same motorized one as mine its innovative lighting or something like that...it lights as soon as it starts going up.
http://www.diamondperformanceparts.com is where I got mine. Give them a call they should be able to get the led bulp part.
http://www.diamondperformanceparts.com is where I got mine. Give them a call they should be able to get the led bulp part.
#3
Registered
Join Date: Jun 2014
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I just had to replace mine because the mast was damaged.
http://www.innovativelight.com/
Thats who makes the light (they dont make the power mast anymore).
http://www.innovativelight.com/
Thats who makes the light (they dont make the power mast anymore).
#6
Registered
iTrader: (1)
Join Date: Apr 2005
Location: Long Island New York
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Just got it today. Looks exactly the same as the power light. Direct replacement.
simple install. you may need to remove the panel in the engine compartment for easier access. The new light is a 2 wire connection, the old was 3 wires.
boat harness wiring / to new light wiring:
boat harness green / to new light red
boat harness black / to new light black
red to old light blue (not used anymore) its the constant feed 12v
simple install. you may need to remove the panel in the engine compartment for easier access. The new light is a 2 wire connection, the old was 3 wires.
boat harness wiring / to new light wiring:
boat harness green / to new light red
boat harness black / to new light black
red to old light blue (not used anymore) its the constant feed 12v
Last edited by raytart; 08-12-2015 at 08:10 PM.