500 EFI Power Increase
03-10-2005 | 12:47 AM
#35
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Re: 500 EFI Power Increase
Originally Posted by Linster
Firing up first motor tommorow night. Hope all goes well. Dyno test not looking good on the second motor. 2 weeks to Sarasota.
hold out for the dyno amd try to get the ecu reprogramed . you will need it!!!
let us know
Linnie what kind of #'s ya looking for ????
Robster
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
03-10-2005 | 12:53 PM
#36
Thread Starter
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Re: 500 EFI Power Increase
JUst fired the first motor. All is good but very rich. Idled at 700RPM, but seemes it trying to stall. The ECU's are going to Mark @ Precision Today!
03-13-2005 | 01:52 PM
#38
Thread Starter
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Re: 500 EFI Power Increase
Both engines are in and running. Will have to get the ECU adjusted. Thay are rich at cold idle. They seem to clear up a little at warm idle but the soot is allready there. They sound much better. Very crisp sounding. Water testing this Tuesday night. Have to buy two new injectors for the lean cylinders as they are not getting fuel. Hopefully they will be here soon.
After that I will send off the ECU's to Mark. Getting the computer hooked up with Diacom software tommorrow for Tuesday testing.
After that I will send off the ECU's to Mark. Getting the computer hooked up with Diacom software tommorrow for Tuesday testing.
Re: 500 EFI Power Increase
