Offshoreonly.com - Dyno Day

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Northern Illinois Offshore Club (https://www.offshoreonly.com/forums/northern-illinois-offshore-club-137/)

- - Dyno Day (https://www.offshoreonly.com/forums/northern-illinois-offshore-club/124725-dyno-day.html)

10x	03-16-2006 07:14 PM

Re: Dyno Day

3 Attachment(s)

Heres some photos from Dyno Day

10x	03-16-2006 07:15 PM

Re: Dyno Day

3 Attachment(s)

Some me (Dennis) tunin on Franks Motor

10x	03-16-2006 07:17 PM

Re: Dyno Day

3 Attachment(s)

10x	03-16-2006 07:18 PM

Re: Dyno Day

3 Attachment(s)

From the first weekend

10x	03-16-2006 07:20 PM

Re: Dyno Day

3 Attachment(s)

Takin em Home

MrCIG

03-16-2006 07:21 PM

Re: Dyno Day

Quote:

Originally Posted by 10x

Mark, I can get you 2 pr. of Holley 750 dbl pumpers. Those should work good on your 540's. If the engines are 9.800 deck, I have a pr of blower intakes too. Also have the spacers for the 10.200 blocks. :D

Dave, the solid rollerlifters we talked about, I forgot, I used them in a pr of spare 588 N/A's. :eek: SORRY :( I'll ask around, I know alot of guys with a ton of spare cams & roller lifters, but I would highly suggest new ones. Thry're not that much anymore.

Just checked on some pricing.
Crane spring loaded locking bar roller lifters, good for up to 720 lift @ $195 per set.
Crane verticle bar lifters $235. per set.

Dave I have 2 set of good used solid rollers and matching push rods I took out of my boat. Let me know if you interested give you a good deal since i still owe you for the modules

Mark

10x	03-16-2006 07:22 PM

Re: Dyno Day

3 Attachment(s)

Neat truck that stopped by during Pulls

DWES	05-13-2006 01:03 PM

Re: Dyno Day

1 Attachment(s)

Frank have you ran the boat ?
Dave

Downtown42

05-13-2006 01:29 PM

Re: Dyno Day

Looks great Frank! :D

10x	05-14-2006 12:30 PM

Re: Dyno Day

Quote:

Originally Posted by DWES

Frank have you ran the boat ?
Dave

Just got the rotors back from the blower shop the end of the week, hav'nt put em back in the case yet. Just a few little things left to do like changing all the carb gaskets, safety wiring the mufflers on, waiting for Dennis's wife to get the right color thread to embroyder the backs of the bolster head rests. Been just kinda playin with stuff, if the weather permitts. I'll probably spalsh it next weekend for a test run. :D
Thanks again for all that hyd roller lifter info. :rolleyes: I guess I was trying to split hairs. :eek:

All times are GMT -5. The time now is 07:56 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page