Old school 1990 35' Express project starting soon
#23
Crazy Energy
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Hi Bill, The cat was pulled into the shop a couple days ago to start the rigging. Bilge is painted and ready to go. We will be ready for next season. This is a slow long process starting off with a bare hull. You know how picky I am, nothing goes fast except when I'm done.
#24
Crazy Energy
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
My blower moters trade fell thru so I got my supercat engines back and bought a set of polished carbed Whipple 3.3's W/ coolers and 1050 dominators to go on top of those supercat engines. We are wanting 850 HP. We will be adding a set of blower pistons and cams. Should still push the cat pretty good.
Here are my Supercat engines I had in my Velocity that we are installing the blowers on for the cat.
Here are my Supercat engines I had in my Velocity that we are installing the blowers on for the cat.
Last edited by Velocity Vector; 09-18-2010 at 07:16 PM.
#25
Cool thread,I wonder how the chrome on the valve coves will hold up.Ive been pulling my motors every winter just to repolish all the aluminum,Chroming the valve covers would sure help!!
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#27
Banned
#28
Crazy Energy
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
My wife is really sensitive about her toe's, Cat you really hurt her feelings.
Last edited by Velocity Vector; 12-12-2010 at 01:08 PM.
#29
Crazy Energy
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
I finally found another set of Stellings headers and 5" dry tails. The other set I bought were said to be tested but leaked like a sprinkler system. These came out of a 40 skater flat deck as seen in photo's. Also got a tie bar for the 6's.
Last edited by Velocity Vector; 02-10-2011 at 03:53 PM.