Re: 1998 37 complete remake
 

The boat came with HP500s, hurt one really bad at a poker run. The triple set up was 598ci 725hp hydraulic cam pump gas ran XZ drives without any problems for three years. Used the blocks destroked to 565 ci (the wipples can't handle any more ci) CMI build the headers for these motors pulled over 1000hp on the dyno detuned them to 925hp.
Have B-max poker run drives, currently putting IMCO lowers to get the props deeper in the water currently at almost 30% slip.

Re: 1998 37 complete remake
 

Have you tried turning the props the other direction?

Re: 1998 37 complete remake
 

This weekend

Re: 1998 37 complete remake
 

Enough 4 Play. I past you a couple weeks ago coming out of the St Joe Pier Heads. You were heading out and we were heading in. Beautiful boat!!!! As well as she sounded great! You guys must have gotten a liitle wet from that rain that came in.

Re: 1998 37 complete remake
 

It poured down rain and then the fog set in to make things really interesting. What were you running.

Re: 1998 37 complete remake
 

Powerquest 26 Legend with purple, gray and yellow graphics. We made it about 200 yards from the dock when it came down. So much for keeping it nice and dry before I put it away.

Re: 1998 37 complete remake
 

I have only taken the boat out on Lake Winnebago in Wisconsin, will be out this weekend going to be cool (55-60) but sunny

Re: 1998 37 complete remake
 

Boating season just ended for me. Ran the boat this pm and the starboard motor blew a head gasket. I was only running 5000 rpm when the gasket blew. Pulling the motor tonight will find out what happen. I guess there's always next year

Re: 1998 37 complete remake
 

Sorry to here that, mine end 4 weeks ago when I hit some thing under the water and took a drive out.

Re: 1998 37 complete remake
 

Copper head gasket blew out, Mercury is switching the 525s from copper to steel, I guess I'm doing the same