![]() |
Re: Take a look at three digit this weekend
Originally Posted by Pantera28-650HP
Has anyone tried a box on there 28 without a notch? How'd it perform. The Konrad has about a 10" set back.
|
Re: Take a look at three digit this weekend
Albert,
boat looks meannnnnnnnnn..... been going out clubing w/Mike (Donz J.R.) and you boat has been the topic a couple of times....... Andy, |
Re: Take a look at three digit this weekend
Hi Albert,
The boat is looking goood!! |
Re: Take a look at three digit this weekend
Originally Posted by lowblue320
Albert,
boat looks meannnnnnnnnn..... been going out clubing w/Mike (Donz J.R.) and you boat has been the topic a couple of times....... Andy, Hi Andy, thanks bro, yeah I`m going to get the boat back in the race course next year, so Mike can get a taste of no mercy for one hour. Albert |
Re: Take a look at three digit this weekend
Originally Posted by TomR
Hi Albert,
The boat is looking goood!! Hi Tom, thank you bro, she is a hand full.... Albert |
Hey Albert,
Have you kept any record over your rpms/top speeds with different props? I would like to know what slip # and top speeds you have with Bravos and Hydromotives. Have you ever tried a std Merc lower instead of that Imco one? If so, any differences in speed, slip and handling?! Thanks, Tomas |
Originally Posted by tomas_wallin
(Post 2228471)
Hey Albert,
Have you kept any record over your rpms/top speeds with different props? I would like to know what slip # and top speeds you have with Bravos and Hydromotives. Have you ever tried a std Merc lower instead of that Imco one? If so, any differences in speed, slip and handling?! Thanks, Tomas I`ve only made three passes at full throttle and don`t plan to do anymore. All but two were with the old Gen 2 exhaust. 31 H6 Hydromotive labbed- 6200rpm`s 102 mph 15% slip 32 Px5 Hydromotive labbed-6200rpm`s 100 mph 18% slip the two above were with the Gen II`s 32 Brave labbed- 6300 rpm`s 101 mph 16% Gen III`s This was pumping 11 lbs. of boost using race fuel making the motor at around 1050 hp. Remember Tomas, my motor is alot bigger than yours 584 c.i. with a 14-71 and two marine race 1050 on top. Dart fully ported 360 aluminum heads and a solid roller cam. With respect to high speeds, I don`t plan to achieve these speeds anymore due to the nature of the beast. I have achieved my goal and don`t need to impress myself anymore. At 95/97 is plenty fast for me right now and there are very few boats that can keep up with me at 90 mph. |
Thanks,
I was just curious to see if the slip# stay around 16% even at those speeds with the notched Panteras and they apparently do. I'm not trying to outrun you... Hahaha What about your race engine then? Any numbers? |
Albert, If your going out this weekend let me know, I'll be out.......
Andy |
Originally Posted by tomas_wallin
(Post 2228645)
Thanks,
What about your race engine then? Any numbers? |
| All times are GMT -5. The time now is 10:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.