Re: 28 Sit down is getting a facelift.
 

Its mostly plumbed and Im working on exhaust tonight hope to hear run in boat by the weekend. SPELLING AND GRAMER IS OVER RATED

Re: 28 Sit down is getting a facelift.
 

Brian what is your X dimension?

Let me know about your prop selection too please!!!!

Where are more pictures???:D

Re: 28 Sit down is getting a facelift.
 

Prop is 2 1/4 below bottom without spacer I try to be 31\4 to 3 1\2 I believe Im cut at 21 .Real lose at 3/1/4, but is the fastest but It handles better at 3 1/2

Re: 28 Sit down is getting a facelift.
 

I will hear it run in the boat today will post picts im gona try a 31 6 blade if that dont work I will try a 32 five blade

Re: 28 Sit down is getting a facelift.
 

I can't wait to hear how it runs with the new power. Are you still using the 1.5 ratio?

Re: 28 Sit down is getting a facelift.
 

does your boat have a notch?

Re: 28 Sit down is getting a facelift.
 

oops just saw the pictures...

Re: 28 Sit down is getting a facelift.
 

Brian , Did you get her to the water yet ?

Let us know how you made out with the props .

Re: 28 Sit down is getting a facelift.
 

Pictures And A Full Report Please!!! :d :d

Re: 28 Sit down is getting a facelift.
 

Ok motor is in boat sounds nasty runs good no problems however drive and stering are not ready. Ron asked about hot rod its come a long too.

Gimble is done hope to have drive on this weekend had to rebuild gimble it wasgetting lose ..

Nice. . .both the engine and Hot Rod!!

Brian you need some tires on that hotrod there are not big enough .see you this weekend in Miami

Hey B:

I'm coming in for a few days landing late Monday night and takiing off on Thursday afternoon. Will give you a buzz.

Hot rod looks cool...bet it saw the new pavement out front a few times already.

Nice going Brian, remember to get your throttle linkage parallel with your bracket. Meaning, try to raise your bracket in a way to level out the cable. Good luck this weekend, Albert

Actualy just ajusted the linkage on the dyno its working real well.?? I hired a guy to put a couple of stripes on the nose of the boat and it has turned into a full paint job who nows what this thing is going to look like >> Yes the hot rod needs tires bad at 60 mph its so lose it will spin itself backwards. Its a 535 and about 9 lbs boost on a solid roller tall deck prety wicked for the car 4 inch exhaust. Probaly 875 hp guessing.

Actualy waiting on Teage to send drive shaft they sent wrong one.

Albert are you at Miami boat show sat ?

:evilb: Brian I will be there all day today, probably on the water Saturday. 305-310-0911 cell

:evilb: :evilb: :drink: :drink:

Brian,

I'll be around the show all day Sat. Give me a call if ya wanna meet up.

Rick 954-254-0414

Boats starting on new look

I will take your phone nos mine 239-872-0952

lookin good, got your #

Ok some picts not real sure about a lot of things????

SMOKIN' :cool:

I think it looks awesome! The only thing I'm not crazy about is the green flame. It's not the color I like that I guess it's just the design. Other than that it really looks tough!

Mike

there has been some redesign and green has been changed it was to olive hope to have picts tomarow.

Final job its done like it or not

It doesn't matter what anyone thinks as long as you like it!!! Nice job. Now let's hear the numbers when you splash it!!

I wasnt real sure at first but it grows on you and in the daylight it grabs you so im in I guess..

Its a pipe dream but hope to splash it next weekend

I think it looks great, if I were a little more talented with the airbrush, I woulda done something similar, but instead I got plain 'ole purple.

Is yours purple and have I seen tour boat ??

In regards to 650 comment I am not totaly looking to go a whole lot faster its lose at 90 plus, I know it will go faster but I hope to pick up my med cruise to run 75 mph a lot easyer. I realy dont wish to go break a bunch of parts or get dead when I splash it.. 650 has been going 70 plus for so long im not sure he knows how fast things change at real speed.Albert will chime in on this one it gets real serious.. I will pick my battles if Im not feeling good or the water dont feel good, dont stretch it out or you wont be here to type on this stupid board no more.

Here ya go Brian, its almost complete, a few odds and ends, and install the interior.

Cabin shot, gotta love the eyes, this was originally a stripped cabin, the boat originally had twin 2.4's, race setup, and was raced under the name "Bad Company"

Here is the 3 man bolster that will be going in it, and a pic of the original boat, as I got it.

Ok Ok I know the boat I didnt put 2/2 together

Rick,

You've done a hell of a job on that boat, it looks awesome! Now get it in the water before we start calling you a trailer queen.:drink: