Where is PV?

It was taken off San Diegeo. Fun time and that water was rough.

Sorry for the LA speak! PV is Palas Verdes, that big hill to the right of Long Beach as you roll out of the harbor. At the end is Point Fermin. Lots of nice big bumps heading into the swell there!

I have the Python that Rik posted the pic of. Great drive and so much fun to drive! Wish I had Arnesons on my Pantera.

I Loved running it in ruff water and never had a problem with it around the docks.

Best customer support.


BTW: its 4 sale at a good price!

Rik...I don't know if you knew the guy with the 18' Donzi that would do 130 mph but he had trouble carrying the bow and made a foil that attached to the bottom of the skeg. He also ran your rocker plates. Do you have anything like the setup that he made for non-step V's? I have a 25 Donzi ZX and I was wondering if you had a solution for boats that need to carry the bow to run out but had no natural bow lift.

Friend of mine has an Arneson on a 24' boat with a 6' beam. He does not know the type of boat and cannot find any hull ID #'s but I have seen the boat a number of times and from the rubrail down it is the Pantera/Excalibur type. The deck design makes me think it is a Monza. The boat runs real good and throws a mean tail. I have some pics somewhere that I'll post.
matt

Some pics of the 24' w/ Arneson...

Pretty sure it's a P&D...it looks nice what's it run?

I think it runs in the low 70's. He just put a fuel injected big block in it. It could be a P&D. It is mid 1970's I would guess.

Here's a "nice" one for somebody...

http://cgi.ebay.com/ebaymotors/Boats...1%7C240%3A1318

What's the story on it?

Must be Arneson single day on ebay...

http://cgi.ebay.com/ebaymotors/Boats...1%7C240%3A1318