24' outboard conversion
02-13-2009, 07:59 PM
#1
Registered
Thread Starter
Join Date: Jun 2008
Location: tampa, fl
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
24' outboard conversion
I am toying with the idea of converting my 24 I/O to a twin outboard setup.
Has anyone ever done this?
I located a stainless marine twin bracket with swim platform 80"wide 30" setback and setup for 11deg transom, any issues using this?
I am in the beginning stages of thinking thru this conversion so any thoughts are appreciated.
Has anyone ever done this?
I located a stainless marine twin bracket with swim platform 80"wide 30" setback and setup for 11deg transom, any issues using this?
I am in the beginning stages of thinking thru this conversion so any thoughts are appreciated.
02-13-2009, 09:04 PM
#3
Charter Member
Charter Member
Considering the 30K for a pair of 300's or 225's plus the rigging and such it may be a better idea to just drop in a 496HO or a 525 with fresh water cooling and use the extra cash for go juice. Or take the 30 and your boat and get one turnkey with the outboards factory rigged.
Last edited by IRONMAN; 02-13-2009 at 09:09 PM. Reason: add some
02-13-2009, 09:14 PM
#4
Considering the 30K for a pair of 300's or 225's plus the rigging and such it may be a better idea to just drop in a 496HO or a 525 with fresh water cooling and use the extra cash for go juice. Or take the 30 and your boat and get one turnkey with the outboards factory rigged.
