Any difference of 24sport v 24se besides dash..
11-16-2011 | 09:22 AM
#11
Registered
Joined: Feb 2005
Posts: 4,400
Likes: 25
From: Michigan
11-16-2011 | 09:47 AM
#12
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
Maybe, but I doubt it, that would take an entirely different mold(I think). From what I could tell when I had the deck off of mine, the outboard boats had I/O decks that were modified to have the splashwell, seemed to me they all came from the same mold.
11-16-2011 | 09:56 AM
#13
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
Just looked at Ziemer's for sale thread, and his deck looks the same as mine, except for having the vee molded into it, see the third pic down.
http://www.offshoreonly.com/forums/p...tera-se-2.html
http://www.offshoreonly.com/forums/p...tera-se-2.html
11-16-2011 | 10:13 AM
#14
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
11-16-2011 | 10:15 AM
#15
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
A view looking out onto the deck from the cockpit.
http://s215.photobucket.com/albums/c...3DIMG_0118.jpg
http://s215.photobucket.com/albums/c...3DIMG_0118.jpg
11-16-2011 | 10:18 AM
#16
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
Looking at this pic, it DOES appear that having the vee extend forward would add slight headroom at the center of the cabin vs. having the "Bump up" for the straight windscreen running straight across.
http://s215.photobucket.com/albums/c...3DIMG_0119.jpg
http://s215.photobucket.com/albums/c...3DIMG_0119.jpg
11-16-2011 | 11:19 AM
#17
Registered
Joined: Sep 2008
Posts: 945
Likes: 15
Actually, I retract the statement about the full width dash, probably MOST sitdown boats have a wide dash. I forgot about the sitdowns, stuck on oldschool
Actually now that I removed the 3-man sitdown, and have the standups in mine, I am probably gonna reconfigure it back to an oldschool pod dash.
Actually now that I removed the 3-man sitdown, and have the standups in mine, I am probably gonna reconfigure it back to an oldschool pod dash.
11-16-2011 | 11:25 AM
#18
Registered
Joined: Sep 2008
Posts: 945
Likes: 15
I thought they had 2 different deck molds? Maybe they do have a insert plug. Where the transom meets the deck is different too. At that point, I mean. The deck at the back isn't as tall...more flat, cut down. Pepe, Joe?
11-16-2011 | 12:04 PM
#19
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
On mine the splashwell was weird, like it was molded to the hull at the back, I cut the transom cap to seperate, then I made a mold, and reconfigured it before reinstalling.
11-16-2011 | 12:50 PM
#20
Registered
Joined: Mar 2001
Posts: 2,804
Likes: 4
From: Miami,FL. USA
There are 2 different deck molds for the 24' model. The Sport is a "racier" version while the SE has easier access to the cabin with a flip up cabin door, a bit more head room as you step down, facing seats, different dash, closet, etc. etc.
JO
JO
Last edited by JO - PANTERABOATS; 11-16-2011 at 12:54 PM.
