- - combat zone 24 restoration
(https://www.offshoreonly.com/forums/pantera/270047-combat-zone-24-restoration.html)
OCCJoe
05-08-2013 05:12 PM
Originally Posted by sparky24
(Post 3921698)
they could probably make it out of fiberglass for a lot less im guessing
what are the dimensions maybe one of these would fit on my boat
You are correct ! The carbon fiber was 15X more expensive then fiberglass construction but it's so bad a$s . Me and FX10 are already planing on doing some carbon fiber on some boats next .
Because we did the paint and resto on the boat we were more then willing to make this hatch .
The tree man boat has a little bigger hatch then most 24/7's . But we could block off part of the mold and produce smaller hatches .
We've already blocked off the sides and popped out the scoop section for some other customers ..
OCCJoe
05-09-2013 02:05 PM
2 Attachment(s)
Mike sent me some pic's but we want more !
rchevelle71
05-09-2013 02:30 PM
Is that a stess crack I see already in the corner behind the hatch?
OCCJoe
05-09-2013 04:59 PM
Shady work !
rchevelle71
05-10-2013 07:23 AM
Originally Posted by OCCJoe
(Post 3922403)
Shady work !
Just messin' with ya:lolhit: Mine gets stresscracks in the corners like that all of the time when I run it the way it is supposed to be run:evilb:
JAIME
05-11-2013 11:45 AM
boat is lookin good with that hatch. Whats the length of it, looks kinda short for 3man. I thought they were all the same on 3pack about 5'-0"
OCCJoe
05-11-2013 12:09 PM
I believe its 49" front to back . I only measured it fifty times I should have it etched in my head .
waterboy1
08-08-2013 03:43 PM
The boat looks fantastic...are there still plans to race it this year?
