Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Pantera (https://www.offshoreonly.com/forums/pantera-39/)
-   -   Fukn a what do I do for steering (https://www.offshoreonly.com/forums/pantera/272977-fukn-what-do-i-do-steering.html)

scarab63 03-23-2012 07:37 AM

Fukn a what do I do for steering
 
On my 24 resto the transoms gettin crowded real quick.
My k planes are right where my steering plates need to be.

Ive seen moded k plane brackets with the steering rams bolted to them, but that wont work for me. I also know mayfair makes a compact system but id like to make that my last resort $$.

I may buy the wing plate for that system & cut down my rams @ a machine shop.

Any ideas?
What is everybody else running?

no limits 03-23-2012 08:37 AM


Originally Posted by scarab63 (Post 3647437)
On my 24 resto the transoms gettin crowded real quick.
My k planes are right where my steering plates need to be.

Ive seen moded k plane brackets with the steering rams bolted to them, but that wont work for me. I also know mayfair makes a compact system but id like to make that my last resort $$.

I may buy the wing plate for that system & cut down my rams @ a machine shop.

Any ideas?
What is everybody else running?

Always an issue. I am assuming the tabs are in the same place. Now that you have Bravo vs. TRS the wingplate and drive difference is causing issues. You have probably 9" rams? Different rams might be best, but yes more $. Imco, Latham, and WPM make 8" which work well. I was always, told rams could go about 3" above parallel to miss a tab or object. I have seen more. Take a look at onesickpantera's steering and tabs...he has them way above parallel and hull mounts turned sideways to miss tabs. If you could get a wingplate made at a shop to mount to top of Bravo this would help. I have one, but for 2004 and older drive, you probably have XR. Don't think I'd cut rams...should be able to make work.

Stormrider 03-23-2012 08:43 AM

1 Attachment(s)
this help?

scarab63 03-23-2012 08:45 AM

Thanks nick

O s p hook me up with a pic ???

scarab63 03-23-2012 09:11 AM


Originally Posted by Stormrider (Post 3647483)
this help?

Slightly.......thanks
What I really need is some ram lengths from eye to eye & what kind of wing plate.
MD

fantastixvoyage 03-23-2012 10:56 AM

1 Attachment(s)
Mike, maybe this pic will help you out. Boat might look a little familiar....:lolhit:

fantastixvoyage 03-23-2012 10:57 AM

Did you fill in the holes that were there?

88bullet 03-23-2012 11:25 AM

1 Attachment(s)
THOSE RAMS LOOK REALLY FAR OUT!!!. this is a pic on a 28. i know its wider but the rams look tucked in alot closer to the gimble

scarab63 03-23-2012 11:46 AM


Originally Posted by fantastixvoyage (Post 3647581)
Mike, maybe this pic will help you out. Boat might look a little familiar....:lolhit:

Thanks neil...... ;-)
Yes I filled all holes in.
I may just need a new wing plate that bolts above the top cap .
Ive got a mayfair 3 pc wing plate that mounts behind the back cap. That keeps the rams low so I can't get em above the planes like they were. If I did there would be way too much angle.

MD

scarab63 03-23-2012 11:51 AM


Originally Posted by 88bullet (Post 3647604)
THOSE RAMS LOOK REALLY FAR OUT!!!. this is a pic on a 28. i know its wider but the rams look tucked in alot closer to the gimble

Yes tim, my rams have a wide stance like in fantastixvoyage pic except mine now intersect smack dab in the middle of the k plane backing plate. I need a tucked system like your pic, or a new wing plate, or rams, or a combo, or a kick in the mouth.....this projects aggravating !!!:lolhit:


All times are GMT -5. The time now is 08:15 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.