Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Pantera (https://www.offshoreonly.com/forums/pantera-39/)
-   -   Red Roar 1978 24SE restoration starts (https://www.offshoreonly.com/forums/pantera/321525-red-roar-1978-24se-restoration-starts.html)

Nicolasticity 01-27-2015 01:42 PM

Boat is in Devon - I am in Bristol

When I brought my Pantera (in the US in Knoxville) I was initially looking at old 28ft Cigarettes but discovered Pantera through an ad for late 70's 24 SE. It was a Volvo setup. I think it was sold from the Poole area and was £15500 back in the day.

Then I went to the factory and was sold.

and I am one of those idiots who didn't winterise too well but no Im rebuilding not selling a siezed 454.....

Red Roar 01-27-2015 03:13 PM

the boat i now own is a late 70's pantera and was from the poole area.......
so you have a 454 in a 24 now ?

paul buckner 01-27-2015 03:44 PM


Originally Posted by Red Roar (Post 4256886)
the boat i now own is a late 70's pantera and was from the poole area.......
so you have a 454 in a 24 now ?

No Russell He has a siezed 454 in his boat

Red Roar 01-27-2015 03:56 PM

ah. thats better than a seized 350 though so ahead of the game to me

what is the 454 like in a 24 and is the weight of it ok

Nicolasticity 01-27-2015 05:12 PM

Stripped really good condition - tried to hone out one bit of corrosion but now need to rebore 20 would do but probably go to 30 as more choice. Either use Real Steel (I used to work as a Marine Fitter in the 1970's) which a mate in Bordon uses, hes done quite a few 454.

Blocks outside under tarp, crank pistons in the bedroom - all bagged and tagged

In the boat it is some weight with a Bravo 1 and a B&M charger on top but the boats 5 ton all up and looks great and sounds awesome particularly when the blower gives out a little whistle. Not had a problem feather throttle when you come of the plane and its fine.

Red Roar 01-27-2015 11:10 PM

[QUOTE=Nicolasticity;4256949 Either use Real Steel (I used to work as a Marine Fitter in the 1970's) which a mate in Bordon uses, hes done quite a few 454.
.[/QUOTE]

you say either but who else apart from real steel?.
boat sounds nice and not putting me off a 454 now. not sure i would do much else. just want something reliable as it is going to go to spain so a long way from home.
something that would fit easily to a 280 and sit within its range without screaming the nuts off it 24/7 as it is then bound to let fly
any suggestions
on a mission

paul buckner 01-28-2015 04:02 AM


Originally Posted by Nicolasticity (Post 4256949)
Stripped really good condition - tried to hone out one bit of corrosion but now need to rebore 20 would do but probably go to 30 as more choice. Either use Real Steel (I used to work as a Marine Fitter in the 1970's) which a mate in Bordon uses, hes done quite a few 454.

Blocks outside under tarp, crank pistons in the bedroom - all bagged and tagged

In the boat it is some weight with a Bravo 1 and a B&M charger on top but the boats 5 ton all up and looks great and sounds awesome particularly when the blower gives out a little whistle. Not had a problem feather throttle when you come of the plane and its fine.

Five Ton !! What's it made of lead ?
Sounds like a nice package apart from the weight , did you buy the motor from larby on boat mad Nick .

dereknkathy 01-28-2015 05:38 AM

i dunno what nico means by 5 ton. my 34 hatteras is 12000 lbs. panteras weigh about 3400 to 3600 with big blocks and TRS drives.

paul buckner 01-28-2015 06:30 AM

He prob pressed the wrong key

paul buckner 01-28-2015 06:45 AM

Found a motor for you Russell . I will pm you my #


All times are GMT -5. The time now is 12:34 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.