24' SE Pantera Build thread
#31
Registered
Thread Starter
In love with these graphics. E-Man Motorsports Custom Vinyl Graphics Cindy hooked me up, She also did my registration on the front.
#32
Registered
Thread Starter
Updated numbers with half tank fuel. Also learned the spring in the vacuum secondaries was not allowing the backside to open all the way, it does now!
Two guys, Mirage 25 lab'd 66.8 mph, 5200 rpm
Three guys,Mirage 25 plus 66.2 mph, 5200 rpm
I have to get better numbers with my regular mirage 25 I normally run.
I still want to try my friend's Bravo 1 24 and hydromotive 25.
Two guys, Mirage 25 lab'd 66.8 mph, 5200 rpm
Three guys,Mirage 25 plus 66.2 mph, 5200 rpm
I have to get better numbers with my regular mirage 25 I normally run.
I still want to try my friend's Bravo 1 24 and hydromotive 25.
#34
Registered
I guess you don't want it closer to 6k at WOT, so a 23 mirage might be a bit shorter than you wanna try. I also have a cleaver that came with the TRS. Not sure if 23 or 25. Once I can get back downstairs I am gonna start digging stuff out. I assembled the short block just before the knee job. Now I am stuck in bed sucking oxycodone and doing all my boating by surfing OSO...
#36
Registered
Thread Starter
I guess you don't want it closer to 6k at WOT, so a 23 mirage might be a bit shorter than you wanna try. I also have a cleaver that came with the TRS. Not sure if 23 or 25. Once I can get back downstairs I am gonna start digging stuff out. I assembled the short block just before the knee job. Now I am stuck in bed sucking oxycodone and doing all my boating by surfing OSO...
Thank you!
#39
Registered
Beautiful car. Had a few. I still consider 71's late model... man how stuff used to rust back then. Bought a 67 Fairlane GT for parts. I cut 7 spot welds at the firewall and the car broke in half.
#40
Registered
Thread Starter
You're in NJ, i'm not surprised the least bit lol
Do you run the Delaware river at all?