Look at post 53. Doesn't Lok like he used the brackets. But they wouldn't be hard to make.

If you magnify the photo he did use them. Kris may have had a set when he sold the boat.

Distance from stringer to the mount looks to be a lot longer than those plates. What boat do you need them for and what is distance between the stringers? I will look at mine tomorrow and see what they are like? Are you using that same standard merc mount on standard chebby block?

Sorry I used them. If I see a set pop up I'll keep you in mind.

The onlt set is from the vector. I can ask Kris if he has anything.

Thanks for getting back to me.

3/8th thick 4 inch 6061 angle is 55 bucks for a 4 foot piece at grainger. you need 2 feet tops and same amount of flat stock. and you can do better at any metal supply house. you were gonna have to re-drill anything you got used anyway.

Sent pm

67.6 mph, 25 mirage plus, 4900 rpm, half tank by myself. light chop 2'.
66.8 mph 25 mirage plus, 4900 rpm, quarter tank, three guys (600lbs), 2-3 chop.

Nice ride