Powerplay Boats
#1101
Registered
Join Date: Jan 2006
Location: Royal Oak, MI
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
Should run pretty good with twin 500's, but not a lot of room in the bilge.
#1102
Registered
Join Date: Nov 2003
Location: Little Silver,NJ
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Here is my small block 28. I'm suprised how loaded it was with full Latham steering.
#1103
Registered
Join Date: Jan 2006
Location: Royal Oak, MI
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
#1105
Registered
Join Date: Jun 2007
Location: Naples, Me
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
#1107
Platinum Member
Platinum Member
I do also.. My 07 43 NT with 480hp Yanmars and asd-8's did 74.2...at 81 with ...dont know how much hp or size diesels...on the PP... thats pretty good... Loved the boat just had a min. of 80mph I needed to hit....A good project would be 480 yanmars and asd-8's.. or the 480 Cummins and Nxt's....are you ready for July..sometime..
#1108
Platinum Member
Platinum Member
Thread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
I do also.. My 07 43 NT with 480hp Yanmars and asd-8's did 74.2...at 81 with ...dont know how much hp or size diesels...on the PP... thats pretty good... Loved the boat just had a min. of 80mph I needed to hit....A good project would be 480 yanmars and asd-8's.. or the 480 Cummins and Nxt's....are you ready for July..sometime..
#1109
Platinum Member
Platinum Member
Thread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
Jeff the 38 Powerplay I put up had 440 HP Engines and 2 Speeds, the guys said when it shifted the boat would pin you back in the seat.