My new 33
#101
Thread Starter
Registered

Joined: Feb 2007
Posts: 2,839
Likes: 21
From: MID MI
#108
Thread Starter
Registered

Joined: Feb 2007
Posts: 2,839
Likes: 21
From: MID MI
#109
Thread Starter
Registered

Joined: Feb 2007
Posts: 2,839
Likes: 21
From: MID MI
Well... after a long winter, it's finally time to show the new upgrades to the boat. Special thanks to Kirk @ Elite Marine for the hook up on the gauges and throttles, and Brian Orlandi- who took the boat on short notice and got the throttles in for me. Since we were swapping them out, he put in all new indicator and shifter cables for me, so she should be buttery smooth with the new livorsi's 
Here is a before shot of the gauges, I didn't take a before pic of the throttles but there are plenty on previous pages.
[ATTACH=CONFIG]556921[/ATTACH]
And after... I installed the gauges this afternoon. Since this is one of the few that have the holes drilled through the glass instead of a back panel, it was a real pain in the @SS!! Took me around 9 hours.
[ATTACH=CONFIG]556922[/ATTACH]
[ATTACH=CONFIG]556923[/ATTACH]
Went with livorsi platinum faces and polished mega rims, thought that would match nicely with the chrome on the throttles. Next I think I'll powder coat the trim around the trim indicators purple. Enjoy!!



Here is a before shot of the gauges, I didn't take a before pic of the throttles but there are plenty on previous pages.
[ATTACH=CONFIG]556921[/ATTACH]
And after... I installed the gauges this afternoon. Since this is one of the few that have the holes drilled through the glass instead of a back panel, it was a real pain in the @SS!! Took me around 9 hours.
[ATTACH=CONFIG]556922[/ATTACH]
[ATTACH=CONFIG]556923[/ATTACH]
Went with livorsi platinum faces and polished mega rims, thought that would match nicely with the chrome on the throttles. Next I think I'll powder coat the trim around the trim indicators purple. Enjoy!!


Last edited by AJ POWERPLAY; 07-01-2016 at 10:36 PM.








Love this boat!
