![]() |
Originally Posted by Wildman1
(Post 2104042)
Talk to the factory yesterday. They are still cleaning up the molds. They told me that they are going to redesign the air intakes on the top mold deck on the 380. This should help with performance. Said they will be coming out with 2008 models by July.
Thanks for the info! :drink: |
Originally Posted by Wildman1
(Post 2104042)
Talk to the factory yesterday. They are still cleaning up the molds. They told me that they are going to redesign the air intakes on the top mold deck on the 380. This should help with performance. Said they will be coming out with 2008 models by July.
|
hello i have a 340 viper -99 and live in sweden anyone now if i can bay some manuels on this boat there are tings i wont to now how it works.ac,toilet how to emty..and one ting more on the pq webb is nice strip on i think 380 in the front pages anyone now where i can bay stripes like that.. tanks for any help..
|
Viper
rom32
There isn't a manual on the boat but you can get a manual on the motors and outdrive from BAM Marine I had a 99 Powerquest for a few years and may be able to help you with some of your questions . Is there anything specific you are intrested in? You can get some very general test results on the 34 by going to Powerboat Magazine web page and looking under test results. |
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
|
Originally Posted by rom 32
(Post 2105272)
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
|
i am very sorry for my writing but maby only maby someone understand not u but someone
|
Originally Posted by rom 32
(Post 2105272)
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
As far as stripes, hopefully someone on the forum knows a vinyl stripe provider that has the PQ patterns. If not, you may be able to take a picture of what you want to a local shop and have them make the stripes. Good Luck. |
i have a seperate tank for toilett and i have the cap waste.. so now i wonder some emty the tank in the sea.. but this one i have i must open" waste" looks like the gas cap and then suckit clean but whith what.. okej i understand maby i bring my lokal striper a picture
|
performancemary i wonder if i can call u i am from sweden and its so hard to whrite down so u understand i think its better for me to talk .. this is my email [email protected]
|
| All times are GMT -5. The time now is 11:59 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.