Offshoreonly.com
Page 27 of 382
« First
17
25
26
27
28
29
37
77
127
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerquest (https://www.offshoreonly.com/forums/powerquest-49/)
-   -   PQ General Discussion (https://www.offshoreonly.com/forums/powerquest/240354-pq-general-discussion.html)

verbi69 12-13-2010 02:48 PM
Originally Posted by boatnt (Post 3273503)
did the work yourself?
No, I had to pay to have it done, I don't have that talent.

AJ POWERPLAY 12-13-2010 04:13 PM
Tom are your gears turning about possibly putting kits on yours? Trying to finally go one up on 'the big chit' ;)

inknppr 12-13-2010 04:29 PM
Well I am back boys from a desperately needed vacation!!!
What is going on....is everybody behaving themselves...AJ?

specialk 12-13-2010 05:34 PM
Originally Posted by verbi69 (Post 3273372)
Labbed 26 Bravo 1 with 0.70 cup. (the max amount of cup)

There is too much cup on the prop which makes it get squirly on top, a little too much chine walk for my liking, need to use the tabs to straighten it out but not out of control...and the cup eats alot of rpm.....

I'm thinking of going with a 28 labbed Bravo 1 with minimal cup to keep the rpm, and probably gain a mph or 2.
I run stock bravo 1 28 pitch. I turn 4900-4950 rpm. 74 on good days, 72 anyday. I always have a full tank of fuel. I would really like to try a 5 blade to increase cruise speed. You can feel the prop slipping at 3500 rpm.

verbi69 12-13-2010 05:40 PM
Originally Posted by specialk (Post 3273696)
I run stock bravo 1 28 pitch. I turn 4900-4950 rpm. 74 on good days, 72 anyday. I always have a full tank of fuel. I would really like to try a 5 blade to increase cruise speed. You can feel the prop slipping at 3500 rpm.
Some cup and labbing might solve some of the problem, pick up cruising efficiency for sure.
BBlades did mine and it works well.

verbi69 12-13-2010 05:41 PM
Originally Posted by ajfisher (Post 3273628)
Tom are your gears turning about possibly putting kits on yours? Trying to finally go one up on 'the big chit' ;)
Tom is going to buy a case of ether.....nitrous injected...:grinser010:

verbi69 12-13-2010 05:42 PM
:grinser010:
Originally Posted by inknppr (Post 3273639)
Well I am back boys from a desperately needed vacation!!!
What is going on....is everybody behaving themselves...AJ?
These guys are bad to the core....no changing them!!

boatnt 12-13-2010 06:38 PM
Originally Posted by ajfisher (Post 3273628)
Tom are your gears turning about possibly putting kits on yours? you allready are have one up on 'the big chit'! ;)
You Know it aj!

think of it like this,a custom van is kind like the big chit ,big but slooooooow!

now you want to go fast you get a Porche,small but faaaaaast!

boatnt 12-13-2010 06:40 PM
Originally Posted by inknppr (Post 3273639)
Well I am back boys from a desperately needed vacation!!!
What is going on....is everybody behaving themselves...AJ?
I thought you have to work in order to be called a vacation.

pq man 12-13-2010 07:36 PM
Originally Posted by inknppr (Post 3273639)
Well I am back boys from a desperately needed vacation!!!
What is going on....is everybody behaving themselves...AJ?

I call bull chit:bsflag:


All times are GMT -5. The time now is 12:28 AM.
Page 27 of 382
« First
17
25
26
27
28
29
37
77
127
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.