lab the lab
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 272
Likes: 0
From: Ottawa Ontario
I have a 29 pitch mirage plus that was labbed - picked up 2 mph, and was bumping the limiter. I've done some small engine chnages that now get me another 200 rpm - but I can't use 'em cause I'm up on the limiter. Can you add pitch to an already labbed prop? I can't go to a higher pitch bec. 29 is highest in mirage plus and I haven't found any other three blade that gives me as good performance. Any help would be appreciated. Thanks.
#2
Wow,
Did you know the 29 Mirage is actually much higher in pitch than the 29 that is stamped on it.
That propeller in unique to the Mirage family.
Yes we can up pitch it to pull your rpm's down and hopefully gain the extra speed you want.
Did you know the 29 Mirage is actually much higher in pitch than the 29 that is stamped on it.
That propeller in unique to the Mirage family.
Yes we can up pitch it to pull your rpm's down and hopefully gain the extra speed you want.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#3
bouncedcheck,
Can you tell us a bit about your boat, please. What make and model, what power package, drives and gear ratio, WOT RPM and WOT MPH (gps). I am curious as to whether there might be a better prop for your application.
Julie
Can you tell us a bit about your boat, please. What make and model, what power package, drives and gear ratio, WOT RPM and WOT MPH (gps). I am curious as to whether there might be a better prop for your application.
Julie





