Flo Hub to Soild Hub.
07-11-2005 | 08:23 AM
#1
Thread Starter
Registered
Joined: Mar 2004
Posts: 689
Likes: 0
From: LOCKPORT, N.Y.
Flo Hub to Soild Hub.
Hi guy's what washers, spacers do I need when going from a Bravo Flo Torque Hub to a Soild Hub Mirage? I want to try a set just for testing and want it set up right. Thanks
07-11-2005 | 03:08 PM
#2
Registered
Joined: Mar 2002
Posts: 5,143
Likes: 1
From: Cajun Country
Re: Flo Hub to Soild Hub.
The Mercury Hub kits for the Flo Torq kits have a plastic drive sleeve and the Solid Hub Kits have a SS drive sleeve. So the only difference in the kits is the drive sleeve.
Julie
Julie
07-12-2005 | 06:10 PM
#3
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Re: Flo Hub to Soild Hub.
Unless you are talking about the old cast solid hub non-Plus series. Then you will need a different thrust washer.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
