Go Back  Offshoreonly.com > Technical > Prop Talk
Powertech OFX Propellor >

Powertech OFX Propellor

Notices

Powertech OFX Propellor

Thread Tools
 
Old 07-19-2009 | 09:18 AM
  #1  
Rage's Avatar
Thread Starter
Gold Member
 
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
Default Powertech OFX Propellor

Powertech OFX propeller is being marketed as a prop to try for increased top end by providing more bow lift if you can not currently make your boat porpoise at max trim out with your current prop.

What has been anyones experience with a Powertech OFX propeller?
Rage is offline  
Reply
Old 07-21-2009 | 04:35 PM
  #2  
Rage's Avatar
Thread Starter
Gold Member
 
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
Default

Anyone?
Rage is offline  
Reply
Old 08-13-2009 | 11:03 AM
  #3  
Registered
 
Joined: Jul 2007
Posts: 12
Likes: 0
From: Cincinnati, Ohio
Default

What pitch you looking for?
Thanks Zoob
zoobchop is offline  
Reply
Old 08-13-2009 | 11:04 AM
  #4  
Registered
 
Joined: Jul 2007
Posts: 12
Likes: 0
From: Cincinnati, Ohio
Default

Call m I don't have access aol all the time 513-315-5004
ZOOB

Last edited by zoobchop; 08-14-2009 at 07:13 AM.
zoobchop is offline  
Reply
Old 08-13-2009 | 11:25 AM
  #5  
Rage's Avatar
Thread Starter
Gold Member
 
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
Default

Originally Posted by zoobchop
What pitch you looking for?
Thanks Zoob
I will not know until I complete a dyno test. At this point I am just looking for anyone who has tried/used this prop on a boat/motor similar to mine and their results .... preferably A vs B testing against a Bravo.
Rage is offline  
Reply
Old 08-13-2009 | 11:30 AM
  #6  
Rage's Avatar
Thread Starter
Gold Member
 
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
Default

I see where BBlades and Throttle Up do or did carry the Powertech prop line. Their insight/experience as to the merits of a OFX4 versus a Bravo 1 prop on a light 25' 3700 lb dry wt hull (Nordic Rage) with 600hp +/- and Bravo X 1.5 : 1 drive would be very much appreciated.
Rage is offline  
Reply
Old 08-13-2009 | 05:34 PM
  #7  
bbladesprops's Avatar
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Smile

I do not carry the Powertech line although they have tried to recruit us as dealers. I have worked on these propellers on a small basis. At the risk of sounding Bias, we have still found the Bravo 1 to out perform the PT. I have even Lab Finished these props. The results were minor increases in acceleration and decreases in slip. The slip decrease pulled the R's down and the speed stayed the same.

B
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 08-13-2009 | 05:35 PM
  #8  
Biggus's Avatar
Registered
20 Year Member
 
Joined: Apr 2001
Posts: 6,305
Likes: 36
From: Naples, Maine
Default

I've run the PowerTech OFX on several heavy old V- bottoms. In testing back to back (same pitch) with the Merc Bravo One, I've found the PowerTech to be up to 2.5 mph faster on top end over the Merc. The Merc did out perform the PT at mid range cruise.

All told, I've been extremely impressed with PowerTech propellers. I feel they are about the most efficient box stock prop on the market today. They are very reasonably priced and more often than not, out perform props two to three times the price.

I had just ordered a set of 28 PT's, hope to get them tomorrow. I'll post the results.

Kurt
Biggus is offline  
Reply
Old 08-14-2009 | 07:12 AM
  #9  
Registered
 
Joined: Jul 2007
Posts: 12
Likes: 0
From: Cincinnati, Ohio
Default

Originally Posted by Rage
Anyone?
I have a PT 23p Right that is perfect. Don't need it. Have you considered Hydromotive? They offer bow lifting props also, They end with "X" very hard to find used. I am assuming you want a bow-lifter??

Ive tried a half dozen props and came back to a Mirage Plus.

Zoob
zoobchop is offline  
Reply
Old 08-14-2009 | 12:30 PM
  #10  
Rage's Avatar
Thread Starter
Gold Member
 
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
Default

Originally Posted by bbladesprops
I do not carry the Powertech line although they have tried to recruit us as dealers. I have worked on these propellers on a small basis. At the risk of sounding Bias, we have still found the Bravo 1 to out perform the PT. I have even Lab Finished these props. The results were minor increases in acceleration and decreases in slip. The slip decrease pulled the R's down and the speed stayed the same.

B
Thanks for your insight. That is what I was asking for.
Rage is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.