Any one know where or if you can find a prop for a #5 drive?

I have a pair of 17.5 x 29 Mercury 4 Blades available. Labbed by Throttle Up, perfect condition.
These have the interchangeable bushing inserts which will fit #5's and #6's.

Thanks man!! 29 is a little to much for me! thanks though!

What exactly are you looking for? diameter and pitch? Bob

and single or pair; if single, which rotation?
I have quite a few singles in RH down to 16.75 x 25.5 (actual prop scan measurements)

I have a single RH 17x29 in mint shape. 500 bucks + shipping

Well here s the whole deal! Im buying a 28 ft cat, dynoed at 930 at 5900, #5 drive, the guy is only 4900 with a 26, Was told i couldnt get props for a #5 , so wanted to do some checking, not sure what gear ratio and diamater. Single motor. Thanks guys, any info or suggestions is much appreciated!

Isn't there an adaptor available so you can run SSM#6 shaft props on the SSM#3 and SSM#5? Pretty sure there is.

There is a adapter for making the 1.88" bore into 1.75" in the bushing bore type propellers.
Therefore you can run #6 props on your 5 drive. The key is whether the prop shaft has 19 or 26 splines. You need 26.

If you find a propeller within 400 rpm either way of your desired rpm goal. We most likely can get you where you need to be.

Brett

[QUOTE=SFOcean;3640500]and single or pair; if single, which rotation?
I have quite a few singles in RH down to 16.75 x 25.5 (actual prop scan measurements)[/QUOT You have any 28 or 29? 26 spline