LOL, we just don't know do we?

We have all kinds of pitch and models to test. I was just speaking from, well from many other testsss.
We have to start some place.

Thanks 4bus, you're johnny on the spot.

Brett

2002 35' Fountain with 575sci's, intercoolers, and smaller pulleys (apprx. 700/ea.) with 2" shorties on ITS turned 34" Maximus and 36" Bravos (both labbed) to around 5400rpms and a over 100 mph (best of 106mph).

hey brett . rob freeman .you did my 30s this summer . anyway ive purchases some pfaff 750s actual with full dress . for the red boat you put my new 28s on to get me through the 4 hoasemen run we did . we need to get buisy on a set of maxumus props im thinking , please advise time is clicking . motors at riggs now for install thanks rob .you got my number.

Hi Rob,

Oh yes the awesome red paint job on getto boyz!

I'm thinking the 32 pitch casting is the way to go with 500 additional actual HP addition, 30's may be in order though depending on the desired rpm level.

Do you have rpm and speed numbers from either set of 4 blades we can use as a base line. My old records show 4800 and 5000. Those numbers would be more inclined to suggest the 30P 5 blades.

Otherwise, testing with the stock Maximus's is always a starting point.

Brett

im going to need to pull 5800 to 6 k . well get it going ill call ya soon