Hydro help
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
It actually depends on the vintage of each propeller.
In most cases over the last few years the attaching hardware is interchangeable as Hydromotive moved to the square bore FloTorq 2 hub assembly.
If one is a pressed in hub and one is square bore, you will need different stuff.
Brett
In most cases over the last few years the attaching hardware is interchangeable as Hydromotive moved to the square bore FloTorq 2 hub assembly.
If one is a pressed in hub and one is square bore, you will need different stuff.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]