38' fountain prop question
#1
Thread Starter
Registered
Joined: Aug 2008
Posts: 282
Likes: 0
From: Lake George NY / Jackson WY
Sorry if there is already a thread, I couldn't find any info.
So I'm just finishing an engine build and I'm try to see where to start with props and what people have gotten for results.
What I have;
2001 fountain 38' lightning twin step
1.5 gear ratio with a 2" imco shorties
The motors
540ci stroker motors with whipples
Estimated hp should be around 800-825hp.
What are your thoughts?
Thanks in advance.
So I'm just finishing an engine build and I'm try to see where to start with props and what people have gotten for results.
What I have;
2001 fountain 38' lightning twin step
1.5 gear ratio with a 2" imco shorties
The motors
540ci stroker motors with whipples
Estimated hp should be around 800-825hp.
What are your thoughts?
Thanks in advance.
#2
Lab Finished 15 3/8 x 32 5 blade Maximus props.
Of course this will have to be better determined with a actual baseline set of number recieved with any props you can get your hands on. Or with test propeller shipped to you from BBLADES.
Brett
Of course this will have to be better determined with a actual baseline set of number recieved with any props you can get your hands on. Or with test propeller shipped to you from BBLADES.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]




