More pics of this type boat to show depth of outdrive: Note this is listed as a 2001 also.

http://dailyboats.com/bimg/6/1/1/1/3/boat/3.jpg

http://dailyboats.com/bimg/6/1/1/1/3/boat/1.jpg

33outlawsst if u go back an read what was said today at 4:30 it will answer your question.. an as far as running out of top end I can't get it there cuz it's blow the prop out

I see a 6:30 post that I missed

Must be a time difference I'm in central time

sell those valve covers yet?

Thats weird, Im in KC........have you ever taken an boat mechanic with you on a trial run to get their opinion

that drive is deap

No sir

How far below the cavi plate is the pickup tube for the drive shower

I can't tell if that's a real step or a outside fake, And that cav plate is real close to dragging

Sounds like he needs to get the props figured out first. Unrelated but will a bad cone clutch cause a similar problem? A pal has a Baja that will intermittently act similar with different props, tends to blow out for no reason then will be ok for a while. Also has a shower pickup tube very close to the edge of the prop, less than a half inch.