BBLADES Winter Special!
02-10-2017 | 03:41 PM
#21
Thread Starter
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
That's good to hear. With the scx lower I will most likely be running, I'd like to get as much of it as possible out of the water. If things don't work out at 2.25" below I could drop it down to 4.25" where I was able to get 6-8% slip with a 26p LH bravo 1 on a standard dwp lower (behind the 496ho) last season.
So then I just need a starting point. I have a 28 bravo 1 labbed by you guys, will that be enough pitch and blades going up to 2.25"? I would like to be around 5600rpm with this motor. I was at 4650+/- with the LH 26 B1 and the 496ho 4.25" below the bottom. Thanks
So then I just need a starting point. I have a 28 bravo 1 labbed by you guys, will that be enough pitch and blades going up to 2.25"? I would like to be around 5600rpm with this motor. I was at 4650+/- with the LH 26 B1 and the 496ho 4.25" below the bottom. Thanks
We have a new larger diameter 4 blade we just released. It is called the 4-SPEED. It could be the ticket with your higher X dimension.
Brett.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
02-10-2017 | 03:41 PM
#22
Thread Starter
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
We'll look for them.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
02-10-2017 | 04:38 PM
#23
Registered
Joined: Sep 2013
Posts: 2,320
Likes: 1,040
From: Wisconsin
I saw that, sounds like a killer. I'll be giving you a call come spring. Thanks for the help.
02-23-2017 | 04:21 PM
#24
Thread Starter
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
There is still time to get in on the winter special. Get your propellers to BBLADES before the end of the month to save.
Let our team with 90 years of combined experience service your propellers the correct way.
We also off unrivaled personal consulting you just don't get from other prop shops.
Let our team with 90 years of combined experience service your propellers the correct way.
We also off unrivaled personal consulting you just don't get from other prop shops.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
03-07-2017 | 12:03 PM
#26
Thread Starter
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
It is really tough to quote a price without seeing the props.
It could be $50 or $300. You could send me a photo at [email protected]
and I can give you a accurate estimate through email.
Thank you,
Brett
It could be $50 or $300. You could send me a photo at [email protected]
and I can give you a accurate estimate through email.
Thank you,
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
