I put Eddies injection plates on my 575's in my 353 Fastech. He wasn't able to nail the tune down remotely, so I ended up having to tune it myself. I have it just about dialed in, it's been a learning curve for sure. Put an O2 bung in each header, these motors are pretty bad at evenly distributing fuel side to side. I have seen almost a whole ratio difference side to side at certain rpm's, and you don't want to tune to the lean side.

thanks for the feedback, I am semi familiar with tuning efi from an automotive standpoint with multiport injection, but the plate with the mefi3 might be a whole other ball game. Depending on how far the tune is off I might just swap in an AEM infinity since I am already running the AEM CD7 digital dash.

Sweet !! That's some big iron hangin back there.

Did you order you SCX drive yet :ernaehrung004:

A buddy mounted an 750hp blower engine in front of an imco in a 24 Baja a couple of years ago -- i went on the first ride --- we got up to 80 mph and i was like take me back to the dock! That thing rolled on its side with the Torque from the single... After that summer the engine was removed and a stock 454 was put back in to sell. He didn't want the liability of selling to someone the way it handled...

I hope yours works out better for you, maybe you are in an area that is calmer than Lake Erie and it will handle more appropriately!

Hello
Congratulations an this great project ++

To install my Mercury 500 EFI on my Baja 24 Outlaw, I had to cut behind the back seat !!!

---

Thanks for the replies! Scx is on the list, and hoping with the ITS and 280s it’s manageable. I won’t be going full out most the time, and the lakes in upstate NY are pretty calm. I figured I would have to do some cutting to get the engine to fit, should be finding out how much in a couple weeks.

Installed the teague marine billet trim tanks
https://cimg8.ibsrv.net/gimg/www.off...f08c3ce6d.jpeg

Figured id update the thread with updates to project.

PDM / Harness
lighting
navigation
mounts


https://cimg4.ibsrv.net/gimg/www.off...f6e5b31d3.jpeg
https://cimg5.ibsrv.net/gimg/www.off...f604c2dc5.jpeg
https://cimg6.ibsrv.net/gimg/www.off...24ae161e2.jpeg
https://cimg7.ibsrv.net/gimg/www.off...fee5f5209.jpeg
https://cimg8.ibsrv.net/gimg/www.off...03ccc9f97.jpeg
https://cimg0.ibsrv.net/gimg/www.off...15f71ece8.jpeg

Some new pics ! Engine goes in this weekend.

https://cimg8.ibsrv.net/gimg/www.off...37ce6dc1db.jpg
https://cimg9.ibsrv.net/gimg/www.off...90289a913f.jpg
https://cimg0.ibsrv.net/gimg/www.off...8e0f180025.jpg
https://cimg1.ibsrv.net/gimg/www.off...c8772d87cf.jpg
https://cimg2.ibsrv.net/gimg/www.off...815fb34fd2.jpg
https://cimg3.ibsrv.net/gimg/www.off...b8d436ef55.jpg