Be careful not to break both arms pattin' yerself on da back!! LOL

GETTIN' - ER- DUNN

Mr D - Mr D to what honor do I owe thee ?

You know I tried patting myself on the back once but then realized my arms are to short so..

Scott - GOT THEM - THEY ARE AWESOME THANK YOU!!!
"sabers rock!"

Hey Bro, Glad to do them for you & most importantly I'm glad you were pleased !!!

Got the intercooler back over the weekend so things are still rolling along as time & resources permit.. Also should have all my oil & water lines sealed up sometime in the near future..

I still have a fair amount of polishing up to do on the cooler & didn't really touch the boat over the weekend as I decided to take a break & spend a couple days to just hang with the family..

If all goes as planned I'm gonna attempt to get a bit of work done throughout the evenings this week so we'll see how that goes..

Managed to get the intercooler locked in its location only to take right back out in an attempt to get going on the polishing work tomorrow at the shop.. Also getting ready to set the drive on the back pretty soon.. Doing most of the rigging at home has definitely made things a bit more challenging from time to time, but its been worth it !!

No work tomorrow night, it's date night at the TN theater.. :musik010:

Inching along.. It was nice to finally get the tailpipes aiming where they need to.. Then it was even nicer to realize how glad I am that I'm not sniffing ground up bi-ax every time I crawl in here !! ;)

your exhaust cut outs are high like mine, I need to cut off some of the other circle of the ring so it sits flat. I went with 5'' od tails so the rings are 6 1/2 to 7''.

Yeah I figured yours would be pretty high as well.. About 1/3 of my tails were aiming at the rubrail untill I got the tailpipe wedges.. Not real sure what I will end up with for mufflers/no mufflers ect.. ect.. but my cutouts now are just 4 1/4" I have a set of 4 rings, but since the tails exit right at the transom I'm not in a huge hurry to finalize that part yet b/c it will not halt any progress... So that part will happen when it happens...

I my rings and gaskets were 150 shipped. I think there SM and I am going to bend just a little of the top tip of the ring, gas tank done will get it by mid week so if no rain motor comes back out saturday and will start on removing old tank. got pics coming later art