littledcsrodshop

iTrader: (1)

I think Eric was talking about his Oil temp not Water temp..

littledcsrodshop

iTrader: (1)

As Jdub said if you want to run thermotats with a crossover just make sure they have a bypass hose going to the thermo housing

littledcsrodshop

iTrader: (1)

Eric there is a great thread here on OSO addressing the stock 502 hardware & high oil temps.. It was started by Articfriends (smitty) Its a great read & would definatly be worth a look at..

littledcsrodshop

iTrader: (1)

Try this:
http://www.offshoreonly.com/forums/g...ight=oil+temps

jdub

iTrader: (1)

Nah you don't need the circ pump.

Here ya go. This is the set up you need. They even give you the thermostat.

hotjava66

thanks for the heads up, good read. maybe something to look at for a winter project. i have had enough working on the boat I just want to run it now. just have to keep an eye on things and not hold it to the stops for long periods.(not a good idea anyway lol!) i am running amsoil so it should handle a bit of temp anyway

hotjava66

btw still having issues resizing my pics for oso, cant do it cause I have VISTA. anyone know of a way to do it or something to download

martins custom marin

my boat always has what seemed to be a high oil temp 280 @ wot , it would be cooler wile cruising. after looking into it I was told that it is not a problem in nascar they wont even floor the motors till they are at 250 I wouldnt worry about it you can also try some high flow oil filters like wix racing or fram hp and ditch the amsoil. hope this helps