28 Saber Wanted
#92
Registered
Thread Starter
#93
Registered
Thread Starter
They are making some serious headway, shouldn’t be long now. Fuel lines and steering lines plus the dual pump and plumbing all done, leaking trim pump reservoirs replaced and they are about out of room on this bulkhead. They got starboard side in. Still waiting on fuel injectors been waiting on back order for nearly two months now. The narrow beam combined with hatch design really cuts down on rigging space available. They had to move fuel filter mount twice now.
#96
Registered
Thread Starter
Just Waiting on some new fuel injectors on back order
The following users liked this post:
RSCHAP1 (04-17-2024)
#98
Registered
Thread Starter
While the guys were hard at work on the boat I took advantage of some nasty weather from the west and returned to New Mexico again for an epic weekend of snow skiing. We had 10 inches of snow first night and about 4 inches the following day, followed by a blue bird Sunday with 35 degrees.
The following users liked this post:
the deep (04-17-2024)
#99
Registered
Thread Starter
After an 18 year hiatus this 28 Saber is ALIVE! Couple of loose ends but fingers crossed for a shakedown run scheduled for this Friday.
Starboard
Starboard
Last edited by TexomaPowerboater; 04-16-2024 at 07:48 PM. Reason: add links
The following 3 users liked this post by TexomaPowerboater:
#100
Platinum Member
Platinum Member
iTrader: (6)
Nice work TPB.........bilge looks a bit tight......