New member to the SCARAB world
#1
Thread Starter
Registered
Joined: Mar 2006
Posts: 12
Likes: 0
What's up guys! I picked up a 1988 excell 28ft. the end of 05. trying to get this thing ready for the water. No good pic's to post yet. As work goes on more and more ?'s come up. Looking foward to getting some feedback from all you .Thanks..
#3
Thread Starter
Registered
Joined: Mar 2006
Posts: 12
Likes: 0
Whats up Doug!
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
#5
Registered
Joined: Jan 2006
Posts: 88
Likes: 0
Originally Posted by lmjr77
Whats up Doug!
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
#9
Originally Posted by lmjr77
Whats up Doug!
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
I'm putting a 502 pushing 550-600 hp.
It has a mirage plus 25p on it. The boat hasn't seen water yet,so I don't know what to expect with this set-up. Any comments on prop selection.
Your going to have to raise the X if you want more speed.
The 28 excell,s X is set at 7 1/2"
The hull likes 4" a lot better. I personally would go higher if I could but its to much work. The ride is also better with the higher X.
Properly set up you can see 80 mph with 600 hp
Welcome to the board , Good luck with the boat. Keep us posted on your results.
Paul
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
Thread
Thread Starter
Forum
Replies
Last Post
OSO News
Offshoreonly Industry News
0
11-02-2007 12:23 PM
terrygar
General Boating Discussion
4
08-08-2005 05:11 PM
OutlawBayB
General Boating Discussion
32
02-07-2002 05:25 PM





