I just had the front section of my 3 piece windshield made at palco platics in whitman Ma. he could do the mold but cut a flat piece perfect it fit awesome! I told him he should hold on to the pattern... it was 200 for the stock and 80 for the cut. its was on my 87 scarab I and identical to my 1986

The "Hungry Ghost"
 

I have a 21 "Scarab1". I'm gonna have a new winshield made of lexan as it flex'es,and is easy to work into a curve. My 21 has a newer 350 cu in. Mercruiser w/Alpha Outdrive. It runs great!!!! I run in Clear lake-Glaveston Bay Complex-home to TOPPS!!! Good luck and keep the Hammer down!!!

Thats what they made mine out of.. I have enough cut off left to do the side winshield pieces on both boats myself.

Hey All, I bought a Scarab 1ss from the USA last year and imported it to Australia.

Some pics here: http://www.facebook.com/media/set/?s...e1ada81&type=1

I am replacing the screen atm with tinted perspex that was cut on a flat piece from tracing my old one.

I have a new to me 85 Scarab 1 with a 350/Alpha drive combo.

Nice one mate. What sort of speed do you get out of it?

New Scarab Owner
 

I bought a 1989 Scarab Excel 21 and am looking for any parts or pieces to restore the boat. Mainly looking for interior pieces such as seats and trim and possibly a windshield. Thanks

You also might try offshore powerboat swap shop on facebook. You might have to buy a whole other parts boat in order to get the parts you want. Then dispose of whats left when you're done.