Formula 27'1 fastech handles...
05-04-2004 | 09:17 PM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 1,959
Likes: 12
From: Williamsburg, VA
Formula 27'1 fastech handles...
I believe its a 93 or 95 in like perfect shape, but the handles on the back seat attached to the side of the boat, the paint started chipping on them.
We are going to repaint them, but how do you take them off, I know there is a storing compartment under the handles down toward the bottom of the handle and by the seat, so do you have to go up in there and undo a screw or something?
I hope this makes sense!
We are going to repaint them, but how do you take them off, I know there is a storing compartment under the handles down toward the bottom of the handle and by the seat, so do you have to go up in there and undo a screw or something?
I hope this makes sense!
05-07-2004 | 12:56 PM
#5
Registered
Joined: Mar 2004
Posts: 8,162
Likes: 0
Come on Blake.... you've got the boat.
You have an advantage on us.
Look/feel around up in there. Gotta be attached somehow. Either screws from below or studs on the handles and nuts from below, one would think.
If you can't get them off you have to paint the whole boat, so look carefully.
You have an advantage on us.
Look/feel around up in there. Gotta be attached somehow. Either screws from below or studs on the handles and nuts from below, one would think.
If you can't get them off you have to paint the whole boat, so look carefully.
