Go Back  Offshoreonly.com > Technical > General Q & A
Florida Engine builder >

Florida Engine builder

Notices

Florida Engine builder

Thread Tools
 
Old 09-26-2005 | 05:48 PM
  #1  
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,775
Likes: 638
From: Lakewood, NY, USA
Default Florida Engine builder

I am looking at a boat that has two 496, 525hp motors that were built by Wheeler Motorsports of Jacksonville Florida. Does anyone know anything about Wheeler?

Thanks,
Padraig is offline  
Reply
Old 09-27-2005 | 12:10 AM
  #2  
Strip Poker 388's Avatar
Rob
20 Year Member
VIP Member
 
Joined: Aug 2001
Posts: 21,637
Likes: 9
From: Ms
Default Re: Florida Engine builder

Originally Posted by Padraig
I am looking at a boat that has two 496, 525hp motors that were built by Wheeler Motorsports of Jacksonville Florida. Does anyone know anything about Wheeler?

Thanks,
I think I remember a catalog from them they did mostly stock stuff,Not 100%

Maybe Laz will chime in
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Reply
Old 09-27-2005 | 12:15 AM
  #3  
Strip Poker 388's Avatar
Rob
20 Year Member
VIP Member
 
Joined: Aug 2001
Posts: 21,637
Likes: 9
From: Ms
Default Re: Florida Engine builder

Yeap I found them

http://www.wheelerpowerproducts.com/index.htm

Maybe someone from that area may know them?

Rob
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Reply
Old 09-27-2005 | 08:59 AM
  #4  
Registered
 
Joined: May 2001
Posts: 1,673
Likes: 1
From: Lake Lanier, GA
Default Re: Florida Engine builder

Pete and his guys at Wheeler seem to be very good people. They do a fair amount of Drag Race stuff. He advertizes in National Dragster a bunch. They buy a fair amount of parts, and we don't ever have any issues with them.
RumRunner is offline  
Reply
Old 09-27-2005 | 11:21 AM
  #5  
offthefront's Avatar
Registered
20 Year Member
 
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Default Re: Florida Engine builder

I am glad this Thread came up .. I am in Jacksonville and have been looking for a shop ... One question would be would it be ok to use a shop like this that does mostly Automobile motors or do you need to find a "marine" only shop ? m
offthefront is offline  
Reply
Old 09-27-2005 | 02:56 PM
  #6  
gotime34's Avatar
Registered
 
Joined: Feb 2004
Posts: 1,129
Likes: 6
From: Jacksonville, FL
Default Re: Florida Engine builder

Originally Posted by offthefront
I am glad this Thread came up .. I am in Jacksonville and have been looking for a shop ... One question would be would it be ok to use a shop like this that does mostly Automobile motors or do you need to find a "marine" only shop ? m
I would definately recommend using someone with marine experience. I let a (primarily) car company do my engines and it could not have gone worse. I kept blowing things up, losing oil pressure for no reason, etc etc. The motors came out and went back in 4 times in 1 summer. When I sent it to a real marine mechanic (JC Performance) he told me that the compression was set at 10.3, and should have been somewhere around 9.5 in a marine application. I would have had to use 103 octane, which was never mentioned by the origonal people. Marine engines, especially high performance marine engines, run in a much different environment than high performance automobile engines, and the person that does them needs to know what their doing. I would use a marine engine builder, just my .02
gotime34 is offline  
Reply
Old 09-27-2005 | 05:06 PM
  #7  
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,775
Likes: 638
From: Lakewood, NY, USA
Default Re: Florida Engine builder

Wheeler apparently does marine engines. Any have any Wheeler Engines? The boat I am looking at has 454s bored to 496, Canfield heads hyd lifters, 850 carbs and are dynoed at 525hp.
Padraig is offline  
Reply
Old 09-27-2005 | 07:46 PM
  #8  
Strip Poker 388's Avatar
Rob
20 Year Member
VIP Member
 
Joined: Aug 2001
Posts: 21,637
Likes: 9
From: Ms
Default Re: Florida Engine builder

Originally Posted by Padraig
Wheeler apparently does marine engines. Any have any Wheeler Engines? The boat I am looking at has 454s bored to 496, Canfield heads hyd lifters, 850 carbs and are dynoed at 525hp.
I would ck out Laz .He is always coming up with new engines to impress us with . He has a very good reputation here and with the racers.Take a look and some of his threads on his engines . It would be worth a drive .

http://www.offshoreonly.com/forums/s...earchid=397724

Rob
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Reply
Old 09-27-2005 | 08:55 PM
  #9  
offthefront's Avatar
Registered
20 Year Member
 
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Default Re: Florida Engine builder

cept padraig is in NY ....
offthefront is offline  
Reply
Old 09-27-2005 | 09:22 PM
  #10  
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,775
Likes: 638
From: Lakewood, NY, USA
Default Re: Florida Engine builder

Originally Posted by offthefront
cept padraig is in NY ....
And the boat I am looking at already has Wheeler engines.
Padraig is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.