Exhaust Questions
03-26-2009 | 11:55 AM
#1
Thread Starter
Registered
Joined: May 2008
Posts: 1
Likes: 0
Exhaust Questions
I am wanting to make a little more noise with my boat. I am currently running twin 454s with the exhaust exiting out of the TRS drives. Any suggestions on how to put through the hulls on? do I need to worry about reversion the motors are only 330hp? This is on a 30 year old boat so it might not be worth doing. Is this a do it youself project or do I need to have someone else do it?
03-26-2009 | 03:57 PM
#2
Registered
Joined: Sep 2006
Posts: 23
Likes: 0
Try Corsa Marine Exhaust and have a look around. I'd suggest the captains call, for those special quite moments.
It can be a DIY job, if you are not afraid of drilling into your transom... In your case 4 large holes.
It can be a DIY job, if you are not afraid of drilling into your transom... In your case 4 large holes.
03-26-2009 | 04:31 PM
#3
Banned
Joined: Aug 2002
Posts: 5,658
Likes: 1
From: IL
Find a used set. With the TRS set up you should have plenty of room. You can do this. Just take your time, lay out the holes properly and start drilling. Be sure to either seal the holes with resin or epoxy.
If I can be of assistance, email me:
[email protected]
Kirk
If I can be of assistance, email me:
[email protected]
Kirk
03-27-2009 | 06:36 AM
#4
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
Find a used set. With the TRS set up you should have plenty of room. You can do this. Just take your time, lay out the holes properly and start drilling. Be sure to either seal the holes with resin or epoxy.
If I can be of assistance, email me:
[email protected]
Kirk
If I can be of assistance, email me:
[email protected]
Kirk
