setting cam endplay with cloyes 2 piece timing cover
08-04-2011 | 02:10 AM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 97
Likes: 0
From: Kelowna BC canada
setting cam endplay with cloyes 2 piece timing cover
Hey guys i have a 2 piece cloyes timing chain cover and i was wondering if anybody out there knows the correct method of setting the endplay with this cover?
08-04-2011 | 02:40 AM
#2
Platinum Member
Joined: Jun 2004
Posts: 7,317
Likes: 1,032
From: frankenmuth michigan
I'm pretty sure my 2 piece cover is a cloyes, I used a roller thrust bearing (on the front of timing gear), I put shims under the roller button base ubtil I had a few thous play, Smitty
