is this cam a good choice or would a bigger lobe be better this is a brodix headed 540 10.2.1 comp want 700plus hp help me out

Call Bob Madera "Marine Kinetics". He will get you going in the right direction. Really, really good person to deal with.

+1

We just finished a 572 project with Bob that got us to 800 HP.

yes ive talked to him already and got some good info from him.
just seeing what others think of this size cam.

What rpm are you aiming for?? The lift numbers aren't crazy, but that's a lot of duration. You running dry tails? I'd think you would need 6k rpm's or more to get there.

No they dynoed to 5500rpm

Is that the cam they used??? What did it dyno??? What did Bob say???

bob says its to small, and the fuel is all phucked up, and its burning twice the fuel it should, he says the dyno was messed

That's a bummer man, oddly enough my lift numbers are similar, your exhaust is higher, your duration is higher by about 15 degrees too, but for 700 hp, I would think you would need more too, but I'm no expert on cams. This sounds like a cam I could have used in my mild 502 if I had dry tails instead of standard risers. If Bob told you it's to small, then it is. Good luck sorting it out.

So what did it make on the dyno???

620hp 650tq both are almost the same at 5200